Fine-diameter Si–B–C–N ceramic fibers enabled by polyborosilazanes with N–methyl pendant group

Given the superior thermal stability and electromagnetic features, continuous Si–B–(C)–N ceramic fibers have displayed great potential to fulfill the increasing demand for the high-temperature structural and functional materials. Manufacture of such ceramic fibers depends heavily upon the design of processable polymer precursors. Herein, a class of polyborosilazanes (PBSZs) with high spinnability were created through a facile one-pot synthesis. The trade-off between spinnability and ceramic yield of PBSZs was overcome by using heptamethyldisilazane and hexamethyldisilazane as the co-condensing agents to polymerize silicon and boron chloride monomers. The optimal PBSZs can fabricate continuous Si–B–C–N fibers with homogeneous diameter of 7.9 ± 0.5 μm and high ceramic yield of 80 wt%. Experimental characterization and quantum chemical computation revealed the mechanistic pictures of the impact of pendant groups on the polycondensation, melt spinning, and pyrolyzing process. These insights improve our understanding of spinnable pre-ceramic polymers for exploiting high-performance nitride ceramic fibers.     

一种最小变形度全景视频映射方法

全景视频需要经过采样映射转换成平面矩形视频,以便后续的压缩编码.针对现有映射方法存在的内容变形和采样不均匀问题,提出一种最小变形度映射方法(Minimum Deformation Projection,MDP).首先提出新的变形度计算公式求得最优解,其次结合像素排列为矩形的要求和人工边界等因素对最优解做近似,最后得到了最优的多边形映射形状和像素排列方案.实验数据表明,MDP的采样密度更均匀,结合使用x265,相对于ERP可以获得约14.47％的增益,优于其他映射方法.     

结合注意力的3D卷积网络脑胶质瘤分割算法

为了提升脑胶质瘤分割精度，提出一种结合注意力机制的3D卷积神经网络算法。输入3个不同尺度的图像块，经过9个卷积层和1个分类层后得到3个不同的分类结果，将分类结果与注意力学习到的权重相乘并逐体素相加得到输出。此外该算法采用了一种混合Dice损失函数与Focal损失函数的超参数损失函数。实验表明，该算法的Dice系数在整体区域、核心区域以及增强区域分别达到了95.31%、80.12%、82.25%。与已有的一种脑胶质瘤分割算法deepmedic相比，整体区域、核心区域以及增强区域的Dice系数分别提升了3%、2%、6%。在脑胶质瘤分割方面，具有重要的临床意义。     

Hot corrosion studies of a salt-coated Ni-based superalloy under flowing wet air and sulfur vapor ambient

Corrosion of a salt-coated Ni-superalloy has been studied at 900°C under a wet air and sulfur vapor ambient. The corrosion thickness, after an incubation of ~60 hr, linearly increases with the corrosion time t and the onset of surface spallation occurred at t ≈ 60 hr. The corroded layer consists of a corrosion front dominated by Cr₃S₄ scales and linear precipitate structures, an inner corrosion layer dominated by Ni₃S₂ and NiO, and an outer corrosion layer dominated by Al₂O₃ networks surrounding the Ni₃S₂ and/or NiO scale structures. The corrosion mechanism is discussed based on the coexistence of H₂O, sulfur, and oxygen.     

Evaluating the profile of myofibrillar proteins and its relationship with tenderness among five styles of dry-cured hams

In order to investigate the relationship between profile of myofibrillar proteins and tenderness among 2 kinds of Chinese hams (Jinhua and Xuanwei) and 3 kinds of European hams (Iberian, Serrano and Parma), shear force, myofibril fragmentation index (MFI), SDS-PAGE, carbonyls content and Raman spectroscopy were investigated. The shear force and salt content of Chinese hams were significantly higher than that of European hams, while moisture content was lower than that of European hams (p < 0.05). MFI values and SDS-PAGE profile revealed that the degradation of myofibrillar proteins in Chinese hams was lower than in European hams. In addition, Chinese hams showed significantly higher carbonyls content and β-sheet content compared with European hams, indicated that proteins aggregation intensively inhibited the degradation of myofibrillar proteins in Chinese hams. These results indicated that the higher shear force in Chinese style hams could be attributed to the lower moisture content and limited proteolysis.     

急性炎性疾病患者乳酸林格氏液液体动力学

目的:探索炎性疾病患者的乳酸林格氏液（Ringer's lactate,RL）液体动力学特征以及炎性生物标记物是否可以作为协变量影响RL分布和排泄。方法:本研究为前瞻性队列研究。选择40例美国麻醉医师分级（ASA）I-II级，腹腔镜下择期胆囊切除术（胆囊炎组，n=20）或者腹腔镜下急诊阑尾切除术（阑尾炎组，n=20）。所有患者麻醉诱导前开始输注RL，按15 mL/kg，35 min内输毕。采用酶联免疫（enzyme-linked immunosorbent assay,ELISA）方法测定血浆炎症（TNF-α,IL-10和CRP）或者内皮损伤生物标记物（syndecan-1,SDC-1）；利用血红蛋白（Hb）稀释-时间曲线和尿量，使用Phoenix软件，采用非线性混合效应模型分析计算RL液体动力学参数和协变量的影响。结果:与胆囊炎组相比，阑尾炎组RL从组织间隙到血浆的转运速率常数（k21）显著降低（14×10-3min-1 versus 35×10-3min-1;P=0.012）。阑尾炎组C反应蛋白（CRP）升高［中位数38.1(1.8-143.6) μg/mL versus 1.3(0.1-159.0) μg/mL;P<0.001］；与清醒状态相比，麻醉期间（输液开始后30～45 min），液体从中央室中到外周室的转运速率常数（k12）显著增加（57×10-3min-1 versus 32×10-3min-1；P<0.01）。清除速率常数（k10）降低90%（0.6×10-3min-1 versus 5.3×10-3min-1;P<0.001）。无论在清醒状态还是麻醉状态下低血压均能降低液体清除；炎症或者内膜损伤的生物标记物不能作为显著影响RL液体动力学参数的协变量。结论:阑尾炎或者胆囊炎患者术前输入液体后“炎症反应的生物标记物”不是RL的液体动力学的协变量，但是两组患者中，全身麻醉期间输入液体的清除率下降。     

柠条的纤维特性及其双螺杆CMP制浆性能研究

以柠条为原料，分析了其化学组分和纤维形态，并探讨了柠条双螺杆CMP法的制浆工艺以及浆料的纤维形态和成纸的物理性能。研究结果表明：与针、阔叶木相比，柠条原料中纤维素和综纤维素质量分数较低，苯醇抽出物和热水抽出物质量分数较高，柠条纤维长度总体偏短，木质部和皮部的纤维质量平均长度分别为0.621和0.819 mm，还存在部分杂细胞。采用3.5% Na₂SO₃和1.5% NaOH常温预浸12 h、90℃汽蒸1 h后再用双螺杆挤浆机在质量分数35%下进行搓丝，并结合高浓盘磨机磨浆，所得CMP浆得率可达73%。柠条CMP浆基本保持了纤维原有的长度，质量平均长度达0.650 mm，长宽比为32.7，纤维解离较好，但分丝帚化情况不理想，含有部分纤维束和杂细胞。当加拿大游离度为300 mL时，柠条CMP浆成纸的环压强度指数和松厚度较高，分别为8.67（N·m）/g和2.56 cm³/g，抗张指数为19.6（N·m）/g，本色浆白度较高，达50%（ISO）。柠条CMP浆适合配抄瓦楞原纸等包装用纸，漂白后可配抄新闻纸和白板纸。     

辊式涂布法构建纸基牢固超疏水表面

采用辊式涂布的方法在纸基材料上构建超疏水表面，并对超疏水表面的牢固性、自清洁性和疏水性能进行评价。用γ-氨丙基三乙氧基硅烷和1H,1H,2H,2H-全氟辛基三乙氧基硅烷（POTS）对微米级和纳米级两种尺寸的TiO₂粒子进行疏水改性处理，然后将改性后的微/纳米TiO₂涂布在纸基材料表面。采用红外光谱（FTIR）对改性后的微/纳米TiO₂的化学组成进行了分析，采用扫描电镜（SEM）对涂布纸表面结构进行了表征，通过接触角、耐磨性和自洁净测试评价了涂层表面的超疏水性、牢固性和自清洁性。改性TiO₂的FTIR分析显示在1000～1500cm^-1之间出现多个C—F键的伸缩振动峰，表明POTS通过化学键与TiO₂表面发生了结合。涂布纸表面的SEM分析可以看出，纸基材料表面上均匀分布了微米和纳米尺寸的TiO₂颗粒，具备了类似荷叶表面微-纳结构的粗糙表面。涂层表面的水接触角为153°±1.5°，滚动角为3.5°±0.5°，水滴在涂层表面呈球形，极易滑落，涂层在水中浸泡7天后，接触角没有发生明显变化，表明纸张表面具备了优异的超疏水性能，且疏水稳定性较好。涂层表面经过10次循环磨损试验后，接触角仍能达到150°，滚动角为9°，表明机械摩擦没有对涂布纸表面的化学成分和粗糙结构造成明显的破坏，超疏水表面的牢固性较好。自洁净测试表明，涂布纸表面具有良好的自清洁和防污性能。该工艺过程操作简单，易于实现工业化生产，为在纸基表面构建综合性能优异的超疏水表面提供了一种新的便利途径。     

基于低高度平面电感的GaN-Si混合型图腾柱无桥功率因数校正器

该文提出基于低高度平面电感的GaN-Si混合型图腾柱无桥功率因数校正器(PFC),利用工频Si二极管的慢恢复特性为高频GaN开关桥臂提供反向电流通路,实现临界电流导通模式无桥PFC和高频GaN开关桥臂的软开关运行.为了实现低高度和高功率密度,提出低高度平面电感结构及其优化设计方法,通过将临界电流导通模式下的电感电流进行分解,给出高频电感磁心和绕组损耗分析模型,并据此对电感结构尺寸进行优化设计.最后制作一台开关频率为200～700kHz、400W的实验样机,验证了所提出的解决方案的可行性和有效性.